Steel & wooden container cabinet
Model：
900*450*1800mm
E-mail:
Key words:
Steel & wooden container cabinet
1. Countertop: Made of 12.7mm thick solid chemical-resistant board, with edges reinforced to 25.4mm thickness; corrosion-resistant, resistant to strong acids and alkalis, heat-resistant, water-resistant, scratch-resistant, impact-resistant, and antibacterial.
2. Cabinet Body: The entire cabinet body, drawers, and cabinet doors are made of 16mm melamine-faced particleboard, with both sides covered in B1-grade fire-resistant panels (fireproof panels), highlighting environmental performance and ensuring personnel safety and the reliability of test results. All shelves with spans exceeding 80cm are reinforced with additional support beams to prevent deformation over extended use.
3. Main Steel Frame: Constructed from high-quality 40x60 square steel tubing with a wall thickness of 1.0mm cold-rolled steel. Connections are secured using specialized connectors. The surface undergoes acid washing, phosphating, and high-temperature curing with epoxy resin powder coating, along with chemical rust prevention treatment. It is resistant to acid and alkali corrosion, offers excellent load-bearing performance, and remains deformation-free even under loads exceeding 250kg/㎡.
4. Hinges: Made from DTC-grade corrosion-resistant steel profiles, these hinges offer excellent elasticity, operate silently, and are highly durable. They can withstand over 100,000 opening/closing cycles without failure, with a maximum opening angle of 110 degrees.
5. Sliding tracks: Constructed from DTC-grade corrosion-resistant steel profiles, these tracks feature strong load-bearing capacity, durability, silent operation, and environmental friendliness.
6. Edge banding: All melamine panels are edge-banded with 2.0mm thick PVC using a Sino-German joint venture “Glue King” hot-melt adhesive for automatic bonding. The edge banding is resistant to peeling, waterproof, and environmentally friendly.
7. Handles: C-shaped gray PP recessed handles are used, which are integrally molded, aesthetically pleasing, durable, corrosion-resistant, stain-resistant, and color-fast.
8. Metal Adjustable Feet: Equipped with load-bearing nuts and shock-absorbing rubber pads. The maximum adjustable height is ≥5cm, ensuring the flatness of the laboratory bench.
9. Inner Lining and Baffle Plates: Made of 6mm-thick anti-corrosive panels, resistant to acids, alkalis, and organic solvents, fire-resistant, and easy to clean. Special corrosion-resistant materials are used to connect the inner lining panels and baffle plates.
10. Liftable door: Constructed with an aluminum alloy frame, the window uses 6mm thick tempered explosion-proof glass. It features stepless balanced lifting, capable of stopping at any position. The design includes an airflow grille to prevent gas leakage. The operating door opening height ranges from 0 to 750mm. The window door is designed with a car window-style sliding mechanism, allowing it to open freely and stop at any height, facilitating wind speed adjustment. Airflow rate: 1.5m fume hood at 1,500m³/hour; the fume hood complies with safety standards. During normal operation, the surface airflow velocity is ≥0.5 m/s when open. The airflow design is scientifically reasonable, ensuring that smoke and fumes are thoroughly and smoothly extracted from the cabinet at an airflow velocity of 0.5–0.8 m/s, with no dead zones or residual exhaust gases.
Translated with DeepL.com (free version)
Related Products
Product Message
Telephone:
Contact: Manager Wang
Address:
#12-14-2, Changjiang Second Road, Yuzhong District, Chongqing，China.
E-mail:
Subscribe immediately！
Enhance your experience and get new product information delivered right to your inbox.
copyright©2023 Chongqing hushi laboratory equipment co.,ltd. This website has supported IPV4 /IPV6