NEWS CENTER

For small partners who do laboratory decoration design, they generally want to know what materials are available on the market now, and what materials are better.

At present, there are mainly the following kinds of laboratory test benches on the market: steel and wood test benches, all-steel test benches and PP test benches. If you say which one of these laboratory test benches is better? In fact, there is no way to decide which one is good and which one is bad. Different functional types of laboratories, the choice of experimental bench is not the same, there is no best, only suitable.

First, all steel test bench

1, shell description: The shell is made of 1.0mm high-quality cold-rolled steel plate in the CNC machining center, cutting, positioning drilling, bending and welding after forming, pickling phosphating treatment after spraying epoxy resin powder curing at high temperature. High adhesion, surface hardness, strong corrosion resistance, beautiful appearance.

2, table: the use of international standards via Asia, Fumeijia or Qiansi board, with corrosion resistance, anti-bacterial and anti-static advantages.

3, door plate description: bevel type, using 1.0mm high-quality cold-rolled steel plate (double layer), solderless connection removable with shock pad. In CNC machining center, cutting, positioning, punching, bending and welding after forming, pickling phosphating treatment after spraying epoxy resin powder curing at high temperature. High adhesion, strong surface hardness corrosion resistance, beautiful appearance 4, handle, hinge, etc. Description: stainless steel matte handle. Equipped with Guangdong Dongtai DTC hinge, beautiful appearance, no noise when opening and closing, more than 50,000 times, rust prevention, corrosion resistance, to meet the international hardware industry standards. It is equipped with a Glaz guide rail.

5, adjusting foot description: The diameter of φ10mm injection molding adjusting foot, shock-proof, moisture-proof, corrosion resistance, can be adjusted according to the indoor floor properly cabinet height, adjustment range is 0-30mm.

6. Process description: All steel plates are visually flat without solder joints after being welded with epoxy resin powder. All water, electricity and gas lines must be safe, suitable and installed in a hidden way. A maintenance hole is arranged on the back panel of the cabinet.

Two, steel and wood test bench

1, countertop: the use of physical and chemical board, epoxy resin board, Qiansi board, ceramic plate, acid, alkali and salt corrosion resistance. The edges are thickened and made small R-shaped polishing, and the lower part is made water sealing groove. It is not easy to wear, fireproof, moisture-proof, hard and unchanged, durable and resistant to impact, antibacterial, anti-static and high temperature. Table bearing capacity greater than 550kg/㎡.

2, cabinet body: 18mm thick E1 environment-friendly impregnated film paper veneer solid wood particle board, national standard DTC three-in-one connector combination, and equipped with shock absorption treatment.

3, cabinet door board: 18mm thick E1 environment-friendly impregnated film paper veneer solid wood particle board particleboard (color optional).

4. Main framework: 40*60*1.5mm thick hot-dip galvanized rectangular steel pipe, (to ensure that the inner wall of the pipe will never rust), double support columns and double weight joist, the connection is equipped with a special anti-stripping hanging connection, the structural metal surface by oil removal, dust removal, phosphating, anti-corrosion spraying high-temperature curing treatment, with elasticity, rust, corrosion, steel frame bearing greater than 550kg/㎡.

5. Edge sealing strip: 1+2mm high temperature hot melt PVC edge sealing strip, surrounded by border water and organic solvent treatment.

6, handle: aluminum alloy font handle or U-shaped handle, the surface by anti-corrosion spraying high-temperature curing treatment, with elastic, anti-corrosion advantages.

7, slide rail: DTC brand three fold silent slide rail, 100,000 times life guarantee, bearing up to 36Kg.

8, hinge: DTC brand 110 degree two-stage stainless steel metal spring hinge 100,000 times life assurance. (Optional hydraulic buffer type)

9, adjustable foot: modified polyethylene anticorrosion, shockproof adjustable foot with anti-corrosion telescopic sleeve, corrosion resistance, height adjustable 0-20mmm. And has the characteristics of super load-bearing.

Third, PP test bench

Material description: Among general plastics, PP has the best heat resistance, and its thermal deformation temperature is 80-100 ° C, which can be boiled in boiling water. PP has good stress cracking resistance and high bending fatigue life, commonly known as "folding glue". The comprehensive performance of PP is better than that of PE material. PP products light weight, good toughness, good chemical resistance. The disadvantages of PP: low dimensional accuracy, insufficient rigidity, poor weather resistance, it has a post-shrinkage phenomenon, after stripping, easy to age, brittle, easy to deformation.

1, the cabinet and drawer door board as a whole is made of strong acid, alkali and chemical resistance, impact resistant porcelain white PP polypropylene board, welded into one, semi-permanent, thickness 8mm, strong acid, chemical resistance, impact resistance, corrosion resistance, no rust.

2, countertop: the use of solid core physical and chemical board, Qiansi board, epoxy resin countertop and ceramic countertop, etc., with anti-corrosion, high temperature resistance, bending and impact resistance, can carry heavy loads and not easy to bend under pressure.

3, all kinds of accessories installation tight, smooth, correct, firm, joint without breaking stubble or loose.

4, door and frame, door and door, door and drawer gap, interval 1-3mm; The tightness of the upper line is moderate, and the error between the length of the line and the length of the board is less than 0.5mm; Hole size error ≤0.5mm; Drawer after drawing down ≤20mm, swing ≤10mm; Table chamfer is uniform, chamfer radius ≤2mm; Requirements level, stable.

5, hinge, handle: the use of strong acid, strong alkali homogeneous PP polypropylene material.